sched.c sched.h 代码分析笔记

首先上header file

sched.h

#ifndef _SCHED_H#define _SCHED_H#define HZ 100#define NR_TASKS    64#define TASK_SIZE    0x04000000#define LIBRARY_SIZE    0x00400000#if (TASK_SIZE & 0x3fffff)#error "TASK_SIZE must be multiple of 4M"#endif#if (LIBRARY_SIZE & 0x3fffff)#error "LIBRARY_SIZE must be a multiple of 4M"#endif#if (LIBRARY_SIZE >= (TASK_SIZE/2))#error "LIBRARY_SIZE too damn big!"#endif#if (((TASK_SIZE>>16)*NR_TASKS) != 0x10000)#error "TASK_SIZE*NR_TASKS must be 4GB"#endif#define LIBRARY_OFFSET (TASK_SIZE - LIBRARY_SIZE)#define CT_TO_SECS(x)    ((x) / HZ)#define CT_TO_USECS(x)    (((x) % HZ) * 1000000/HZ)#define FIRST_TASK task[0]#define LAST_TASK task[NR_TASKS-1]#include 
      
       #include 
       
        #include 
        
         #include 
         
          #include 
          
           #include 
           
            #include 
            
             #if (NR_OPEN > 32)#error "Currently the close-on-exec-flags and select masks are in one long, max 32 files/proc"#endif#define TASK_RUNNING 0#define TASK_INTERRUPTIBLE 1#define TASK_UNINTERRUPTIBLE 2#define TASK_ZOMBIE 3#define TASK_STOPPED 4#ifndef NULL#define NULL ((void *) 0)#endifextern int copy_page_tables(unsigned long from, unsigned long to, long size);extern int free_page_tables(unsigned long from, unsigned long size);extern void sched_init(void);extern void schedule(void);extern void trap_init(void);extern void panic(const char * str);extern int tty_write(unsigned minor,char * buf,int count);typedef int (*fn_ptr)();struct i387_struct { long cwd; long swd; long twd; long fip; long fcs; long foo; long fos; long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */};struct tss_struct { long back_link; /* 16 high bits zero */ long esp0; long ss0; /* 16 high bits zero */ long esp1; long ss1; /* 16 high bits zero */ long esp2; long ss2; /* 16 high bits zero */ long cr3; long eip; long eflags; long eax,ecx,edx,ebx; long esp; long ebp; long esi; long edi; long es; /* 16 high bits zero */ long cs; /* 16 high bits zero */ long ss; /* 16 high bits zero */ long ds; /* 16 high bits zero */ long fs; /* 16 high bits zero */ long gs; /* 16 high bits zero */ long ldt; /* 16 high bits zero */ long trace_bitmap; /* bits: trace 0, bitmap 16-31 */ struct i387_struct i387;};struct task_struct {/* these are hardcoded - don't touch */ long state; /* -1 unrunnable, 0 runnable, >0 stopped */ long counter; long priority; long signal; struct sigaction sigaction[32]; long blocked; /* bitmap of masked signals *//* various fields */ int exit_code; unsigned long start_code,end_code,end_data,brk,start_stack; long pid,pgrp,session,leader; int groups[NGROUPS]; /* * pointers to parent process, youngest child, younger sibling, * older sibling, respectively. (p->father can be replaced with * p->p_pptr->pid) */ struct task_struct *p_pptr, *p_cptr, *p_ysptr, *p_osptr; unsigned short uid,euid,suid; unsigned short gid,egid,sgid; unsigned long timeout,alarm; long utime,stime,cutime,cstime,start_time; struct rlimit rlim[RLIM_NLIMITS]; unsigned int flags; /* per process flags, defined below */ unsigned short used_math;/* file system info */ int tty; /* -1 if no tty, so it must be signed */ unsigned short umask; struct m_inode * pwd; struct m_inode * root; struct m_inode * executable; struct m_inode * library; unsigned long close_on_exec; struct file * filp[NR_OPEN];/* ldt for this task 0 - zero 1 - cs 2 - ds&ss */ struct desc_struct ldt[3];/* tss for this task */ struct tss_struct tss;};/* * Per process flags */#define PF_ALIGNWARN 0x00000001 /* Print alignment warning msgs */ /* Not implemented yet, only for 486*//* * INIT_TASK is used to set up the first task table, touch at * your own risk!. Base=0, limit=0x9ffff (=640kB) */#define INIT_TASK \/* state etc */ { 0,15,15, \/* signals */ 0,{ {},},0, \/* ec,brk... */ 0,0,0,0,0,0, \/* pid etc.. */ 0,0,0,0, \/* suppl grps*/ {NOGROUP,}, \/* proc links*/ &init_task.task,0,0,0, \/* uid etc */ 0,0,0,0,0,0, \/* timeout */ 0,0,0,0,0,0,0, \/* rlimits */ { {0x7fffffff, 0x7fffffff}, {0x7fffffff, 0x7fffffff}, \ {0x7fffffff, 0x7fffffff}, {0x7fffffff, 0x7fffffff}, \ {0x7fffffff, 0x7fffffff}, {0x7fffffff, 0x7fffffff}}, \/* flags */ 0, \/* math */ 0, \/* fs info */ -1,0022,NULL,NULL,NULL,NULL,0, \/* filp */ {NULL,}, \ { \ {0,0}, \/* ldt */ {0x9f,0xc0fa00}, \ {0x9f,0xc0f200}, \ }, \/*tss*/ {0,PAGE_SIZE+(long)&init_task,0x10,0,0,0,0,(long)&pg_dir,\ 0,0,0,0,0,0,0,0, \ 0,0,0x17,0x17,0x17,0x17,0x17,0x17, \ _LDT(0),0x80000000, \ {} \ }, \}extern struct task_struct *task[NR_TASKS];extern struct task_struct *last_task_used_math;extern struct task_struct *current;extern unsigned long volatile jiffies;extern unsigned long startup_time;extern int jiffies_offset;#define CURRENT_TIME (startup_time+(jiffies+jiffies_offset)/HZ)extern void add_timer(long jiffies, void (*fn)(void));extern void sleep_on(struct task_struct ** p);extern void interruptible_sleep_on(struct task_struct ** p);extern void wake_up(struct task_struct ** p);extern int in_group_p(gid_t grp);/* * Entry into gdt where to find first TSS. 0-nul, 1-cs, 2-ds, 3-syscall * 4-TSS0, 5-LDT0, 6-TSS1 etc ... */#define FIRST_TSS_ENTRY 4#define FIRST_LDT_ENTRY (FIRST_TSS_ENTRY+1)#define _TSS(n) ((((unsigned long) n)<<4)+(FIRST_TSS_ENTRY<<3))#define _LDT(n) ((((unsigned long) n)<<4)+(FIRST_LDT_ENTRY<<3))#define ltr(n) __asm__("ltr %%ax"::"a" (_TSS(n)))#define lldt(n) __asm__("lldt %%ax"::"a" (_LDT(n)))#define str(n) \__asm__("str %%ax\n\t" \ "subl %2,%%eax\n\t" \ "shrl $4,%%eax" \ :"=a" (n) \ :"a" (0),"i" (FIRST_TSS_ENTRY<<3))/* * switch_to(n) should switch tasks to task nr n, first * checking that n isn't the current task, in which case it does nothing. * This also clears the TS-flag if the task we switched to has used * tha math co-processor latest. */#define switch_to(n) {\struct {long a,b;} __tmp; \__asm__("cmpl %%ecx,_current\n\t" \ "je 1f\n\t" \ "movw %%dx,%1\n\t" \ "xchgl %%ecx,_current\n\t" \ "ljmp %0\n\t" \ "cmpl %%ecx,_last_task_used_math\n\t" \ "jne 1f\n\t" \ "clts\n" \ "1:" \ ::"m" (*&__tmp.a),"m" (*&__tmp.b), \ "d" (_TSS(n)),"c" ((long) task[n])); \}#define PAGE_ALIGN(n) (((n)+0xfff)&0xfffff000)#define _set_base(addr,base) \__asm__("movw %%dx,%0\n\t" \ "rorl $16,%%edx\n\t" \ "movb %%dl,%1\n\t" \ "movb %%dh,%2" \ ::"m" (*((addr)+2)), \ "m" (*((addr)+4)), \ "m" (*((addr)+7)), \ "d" (base) \ :"dx")#define _set_limit(addr,limit) \__asm__("movw %%dx,%0\n\t" \ "rorl $16,%%edx\n\t" \ "movb %1,%%dh\n\t" \ "andb $0xf0,%%dh\n\t" \ "orb %%dh,%%dl\n\t" \ "movb %%dl,%1" \ ::"m" (*(addr)), \ "m" (*((addr)+6)), \ "d" (limit) \ :"dx")#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , base )#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , (limit-1)>>12 )#define _get_base(addr) ({\unsigned long __base; \__asm__("movb %3,%%dh\n\t" \ "movb %2,%%dl\n\t" \ "shll $16,%%edx\n\t" \ "movw %1,%%dx" \ :"=d" (__base) \ :"m" (*((addr)+2)), \ "m" (*((addr)+4)), \ "m" (*((addr)+7))); \__base;})#define get_base(ldt) _get_base( ((char *)&(ldt)) )#define get_limit(segment) ({ \unsigned long __limit; \__asm__("lsll %1,%0\n\tincl %0":"=r" (__limit):"r" (segment)); \__limit;})#endif

对于_TSS 和 _LDT两个宏定义

#define FIRST_TSS_ENTRY 4#define FIRST_LDT_ENTRY (FIRST_TSS_ENTRY+1)#define _TSS(n) ((((unsigned long) n)<<4)+(FIRST_TSS_ENTRY<<3))#define _LDT(n) ((((unsigned long) n)<<4)+(FIRST_LDT_ENTRY<<3))

TSS是第五个(IDT是第一个) ,每一个描写叙述符号占8byte ，于是有 FIRST_TSS_ENRTY<<3

每一个任务都有两个堆栈。分别用于用户态和内核态程序的执行，而且分别称为用户态堆栈和内核态堆栈。处于不同的CPU特权级中。这两个堆栈之间的主要差别在于任务的内核态堆栈非常小，所保存的数量最多不能超过4096-任务数据结构块个字节，大约为3K。而任务的用户态堆栈却能够在用户的64M空间内延伸。

show_task

void show_task(int nr,struct task_struct * p)//显示p指向的nr号进程的相关信息{    int i,j = 4096-sizeof(struct task_struct);//j记录了任务数据结构之后的堆栈空间大小    printk("%d: pid=%d, state=%d, father=%d, child=%d, ",nr,p->pid,        p->state, p->p_pptr->pid, p->p_cptr ? p->p_cptr->pid : -1);//打印关于p指向进程的各种信息    i=0;    while (i
      
       p_ysptr || p->p_osptr) //假设p进程有同辈的进程。那么打印它们的进程号        printk("   Younger sib=%d, older sib=%d\n\r",            p->p_ysptr ? p->p_ysptr->pid : -1,            p->p_osptr ?

p->p_osptr->pid : -1); else printk("\n\r"); }

关于show_task讨论的一些帖子

http://www.oldlinux.org/oldlinux/viewthread.php?tid=12182

http://www.oldlinux.org/oldlinux/viewthread.php?

tid=14683

show_task

//调用show_task，打印全部非空进程的信息void show_state(void){    int i;    printk("\rTask-info:\n\r");    for (i=0;i

在内核中的调度程序用于选择系统中下一个要执行的进程。

这样的选择执行机制是多任务操作系统的基础。调度程序能够看作为处于执行状态都进程之间分配CPU执行时间的管理代码。

Linux进程是抢占式的。但被抢占的进程仍处于TASK_RUNNING状态，仅仅是临时没有被CPU执行。进程的抢占发生在进程处于用于态执行阶段，在内核态执行时是不能被强制的。(0.12的不能够。貌似如今的能够了)

schdule()函数首先扫描任务数组，通过比較每一个就绪状态任务的执行时间递减滴答计数counter的值来确定当前哪个进程执行的时间最少，哪个counter值最大。就表示执行时间还不长。于是就选中该进程，并使用任务切换宏函数到该进程执行。

schedule()

void schedule(void){	int i,next,c;	struct task_struct ** p;/* check alarm, wake up any interruptible tasks that have got a signal */	for(p = &LAST_TASK ; p > &FIRST_TASK ; --p)//把p初始化为指向最后一个进程的地址的指针,逆向扫描全部进程		if (*p) {//*p 指向当前进程的指针			if ((*p)->timeout && (*p)->timeout < jiffies) {//这里< 没错，我一直非常纠结为什么不是> 这里jiffies是渐变的，持续变的。而timeout 仅仅是作为一个阈值				(*p)->timeout = 0;				//假设当前进程等待非常久了((*p)->timeout < jiffies)，而且这个进程处于TASK_INTERRUPTIBLE				//我们就把这个进程置与TASK_RUNNING状态				if ((*p)->state == TASK_INTERRUPTIBLE)					(*p)->state = TASK_RUNNING;			}			if ((*p)->alarm && (*p)->alarm < jiffies) { //假设此时jiffies大于alarm信号周期，则让将SIGALRM写入进程的信号位				(*p)->signal |= (1<<(SIGALRM-1));				(*p)->alarm = 0;			}			if (((*p)->signal & ~(_BLOCKABLE & (*p)->blocked)) &&			(*p)->state==TASK_INTERRUPTIBLE)// 除SIGKILL SIGSTOP信号外，其它信号都是非堵塞状态的话，而且进程处于TASK_INTERRUPTIBLE				(*p)->state=TASK_RUNNING;//我们就把这个进程置与TASK_RUNNING状态		} /* this is the scheduler proper: */	while (1) {		c = -1;		next = 0;		i = NR_TASKS;		p = &task[NR_TASKS];		while (--i) {//把全部进程都扫一遍，counter是递减的，找出counter最大的进程，保存在next里面			if (!*--p)//当前*p指向进程为空，下一个				continue;			if ((*p)->state == TASK_RUNNING && (*p)->counter > c)			//counter是任务执行时间计数。注意处于scheduled状态的进程也是在执行是。仅仅是没有使用CPU而已				c = (*p)->counter, next = i;		}		if (c) break;//c>0 就说明找到了已经执行一段时间。而且执行时间最短的进程，跳出while(1)		for(p = &LAST_TASK ; p > &FIRST_TASK ; --p)//假设c==0，说明全部schedule的进程都没有执行 			if (*p)				(*p)->counter = ((*p)->counter >> 1) +						(*p)->priority; //又一次计算counter = counter/2 + priority	}	switch_to(next);//让进程next使用CPU}

每当选择出一个新的能够执行的进程时，switch_to()宏执行实际进程切换操作。

该宏会把CPU的当前进程状态(context)切换成新进程的状态。

在切换之前，switch_to首先检查要切换的进程是否就是当前进程。假设是，啥也别做。直接退出。假设不是，就把内核全局变量current置为新任务的指针。然后ljmp 长跳转到新任务的状态段TSS组成的地址处，造成CPU执行任务切换操作。此时。CPU会把其全部寄存器的状态保存到当前任务寄存器TR中TSS段选择所指向的当前进程任务数据结构。然后把新任务状态段选择符所指向的新任务数据结构tss结构中的寄存器恢复到CPU中，系统正式開始执行新切换的任务。

switch_to

#define switch_to(n) {\struct {long a,b;} __tmp; \__asm__("cmpl %%ecx,_current\n\t" \ //进程n是当前current进程。直接结束switch，否则继续je之后的内容    "je 1f\n\t" \    "movw %%dx,%1\n\t" \ //将新任务的TSS的16选择符号存入 _tmp.b 中    "xchgl %%ecx,_current\n\t" \ //交换ecx 和current的值，这个时候current就是next指向的进程了！

"ljmp %0\n\t" \ // long jump 把控制流跳转到 %0 _tmp 处这个long jump比較“特别”。一句两句凝视说不清楚， //可能看到这里会疑惑都跳转了，以下的语句还有什么用？实用！

由于会“跳回来” "cmpl %%ecx,_last_task_used_math\n\t" \ // 原任务是否使用过协处理器 "jne 1f\n\t" \//没用过，跳到l，结束 "clts\n" \//用过，清理 "1:" \ //切换TS标识 ::"m" (*&__tmp.a),"m" (*&__tmp.b), \ "d" (_TSS(n)),"c" ((long) task[n])); \ }

为什么会执行这句话

cmpl %%ecx,_last_task_used_math

既然任务切换时CPU会恢复寄存器现场，那么它当然也会保存寄存器现场了。

这些寄存器现场都会被写入原任务的tss结构里，值得注意的是。EIP会指向引起任务切换指令ljmp的下一条指令cmpl，所以，非常明显，当原任务有朝一日再次被调度执行时，它将从EIP所指的地方，而这个地方恰巧是cmpl !

比較实用的一个帖子：

http://www.oldlinux.org/oldlinux/archiver/?

tid-5390.html

sys_pause

int sys_pause(void) //把当前进程转换成可中断的等待状态，并又一次调度{    current->state = TASK_INTERRUPTIBLE;    schedule();    return 0;}

__sleep_on

static inline void __sleep_on(struct task_struct **p, int state)//看的时候一定要记住，这个_sleep_on 的作用就是把当前进程正等待资源响应或者不在内存时先让他schedule一下，//让别的程序先执行一段时间的，//等到自己等待的资源响应之后，这个时候才跳过if推断，执行后面的语句{    struct task_struct *tmp;    if (!p)//常规检查p 为0的时候直接返回        return;    if (current == &(init_task.task)) //假设当前进程是        panic("task[0] trying to sleep");    tmp = *p;// tmp 指向原等待队列的头指针    *p = current; //*p 指向等待队列的头指针，把current放入等待队列    current->state = state;repeat:    schedule();    if (*p && *p != current) {    //假设*p是 等待队列的头指针。不进入。否则goto一直反复schedule，直到当前current进程是*p        (**p).state = 0;        current->state = TASK_UNINTERRUPTIBLE;        goto repeat;    }    if (!*p)        printk("Warning: *P = NULL\n\r");    if (*p = tmp) // 恢复原来的等待队列，*p 指向原来的等待队列头，逐出current进程        tmp->state=0; //TASK_RUNNING}

interruptible_sleep_on

void interruptible_sleep_on(struct task_struct **p) //可中断睡眠{    __sleep_on(p,TASK_INTERRUPTIBLE);}

sleep_on

void sleep_on(struct task_struct **p)//不可中断睡眠{    __sleep_on(p,TASK_UNINTERRUPTIBLE);}

wake_up

void wake_up(struct task_struct **p)//唤醒进程{    if (p && *p) {        if ((**p).state == TASK_STOPPED)            printk("wake_up: TASK_STOPPED");        if ((**p).state == TASK_ZOMBIE)            printk("wake_up: TASK_ZOMBIE");        (**p).state=0; //TASK_RUNNING    }}

get_pid,getppid,getuid,geteuid,getgid,sys_nice

int sys_getpid(void) //各种系统调用查看进程相关信息{    return current->pid;}int sys_getppid(void){    return current->p_pptr->pid;}int sys_getuid(void){    return current->uid;}int sys_geteuid(void){    return current->euid;}int sys_getgid(void){    return current->gid;}int sys_getegid(void){    return current->egid;}int sys_nice(long increment){    if(current->priority-increment>0)       current->priority -=increment;    return 0;}

sched_init

void sched_init(void)//schedule 的初始化 被main.c 调用，真心之仅仅能大概看懂。非常多初始化设置不知道为什么{    int i;    struct desc_struct * p;    if (sizeof(struct sigaction) !=16)       panic("Struct sigactionMUST be 16 bytes");    set_tss_desc(gdt+FIRST_TSS_ENTRY,&(init_task.task.tss));    set_ldt_desc(gdt+FIRST_LDT_ENTRY,&(init_task.task.ldt));    p = gdt+2+FIRST_TSS_ENTRY;    for(i=1;i
      
       a=p->b=0; //偏址清零       p++;       p->a=p->b=0; //TSS 清零       p++;    }/* Clear NT, so that we won't have troubles with that later on */ //从这里我就不知道发生鸟神马。。。

T-T __asm__("pushfl ; andl$0xffffbfff,(%esp) ; popfl"); ltr(0); lldt(0); outb_p(0x36,0x43); /* binary, mode 3, LSB/MSB, ch 0 */ outb_p(LATCH & 0xff , 0x40); /* LSB */ outb(LATCH >> 8 , 0x40); /* MSB */ set_intr_gate(0x20,&timer_interrupt); outb(inb_p(0x21)&~0x01,0x21); set_system_gate(0x80,&system_call); }

转载于:https://www.cnblogs.com/ldxsuanfa/p/10869116.html

你可能感兴趣的文章